Holder C-Trac C 9700 - Manual (Page 105)

C 9700 ... C 9.88 H
Operating Instructions
104 145 052
Operating the Implements
Engaging the Front PTO
ATTENTION
Never engage the PTO with the engine off.
DANGER
Before engaging the PTO, make sure no-one
is standing close enough to the tractor and
the driven implement to be hurt.
- Pull the PTO clutch lever (3) quickly to the vertical
position. The pressure point must be passed very
noticeably. The front PTO is turned on.
- To disengage it, return the PTO clutch lever to the
horizontal position.
- Return lever (2) to position 0 (neutral).
DANGER
After being disengaged, the installed
equipment can continue to run. Wait until the
equipment is stationary before working on it
again.
3
Bild_087
1
2