Holder C-Trac C 9700 - Manual (Page 106)

Operating Instructions
145 052 105
C 9700 ... C 9.88 H
Operating the Implements
Engaging the Rear PTO
NOTE
The rear PTO can be engaged with PTO
selector lever (4) located at the articulated
joint. The lever positions are shown on the
plate (5).
- PTO selector lever (3) must be turned off.
- Move PTO selector lever (4) up to engage the rear
PTO.
DANGER
Before engaging the PTO, make sure no-one
is standing close enough to the tractor and
the driven implement to be hurt.
- Pull the PTO clutch lever (3) up quickly to the vertical
position. The rear PTO is engaged.
- To disengage it, return the PTO clutch lever to the
horizontal position.
- Push the PTO selector lever (4) down again.
DANGER
After the equipment is turned off, it can still
continue to run. Wait until the equipment is
stationary before working on it again.
Ein
Aus
Bild_090
5
4
3
Bild_087