Holder C-Trac C 9700 - Manual (Page 193)

C 9700 ... C 9.88 H
Operating Instructions
192 145 052
Maintenance Every 1500 Service Hours
ATTENTION
Observe the instructions for handling fuels
and lubricants.
Cleaning:
- Wash the sieve-star filter with clean Diesel fuel.
Replacement:
- Unscrew the sieve-star filter from the filter housing
with a 24mm open-ended wrench.
- Fit a new toroidal sealing ring on the new filter and
screw it on to the filter housing.
The installation of the suction filter is carried out in the reverse
order of removal.
- Refit the oil drain plug (3) with new sealing ring,
ensuring it is properly seated.
- Fill recommended hydraulic oil through the filler neck
(1).
Filling quantity ............ approx. 19 litres (5.02 USGAL.)
- Check the oil level with the oil dipstick (2).
- Refit the filler neck cap.
- Start the engine and make a slow trial drive with the
tractor.
NOTE
The air in the hydraulic system is bled
automatically.
- Shut off the engine.
- Check for leaks.
- Recheck the oil level with the oil dipstick (2) and top
up hydraulic oil, if necessary .
Bild_138
2
1
3