Holder C-Trac C 9700 - Manual (Page 112)

Operating Instructions
145 052 111
C 9700 ... C 9.88 H
Operating the Implements
ATTENTION
If the implement is no longer used, turn off
the power hydraulics starting safety switch
to prevent any unnecessary overheating of
the hydraulic oil.
Never leave the power hydraulic system on:
-
when the engine is running without a load connected
to the couplings
- or not in operation,
- when driving without needing oil.
The overheating can damage the hydraulic system.
Turning Off the Power Hydraulics
- Turn off the starting safety switch (4). The indicator in
the switch extinguishes.
Bild_094
4