Holder C-Trac C 9700 - Manual (Page 122)

Operating Instructions
145 052 121
C 9700 ... C 9.88 H
Other activities
Lights
Turning On and Operating the Lights
NOTE
Turn the preheat/starter switch to position 1.
- Set the light switch (1) to the 1st position.
The front clearance lights (2, 7) and rear tail lights (9,
14) (sidemarker light) are on.
- The position light indicator (2) in the multi-function
display comes on.
- Set the light switch (1) to the 2nd position
The front headlights (1, 8) (dip beam) are on.
Turning On High Beam
- Set the light switch (1) to the 2nd position.
- Move the turn signal lever (4) down. The headlights
(1, 8) are set to high beam.
- The high beam indicator (3) in the multi-function
display comes on.
NOTE
To use the headlight flasher, operate the
signal lever up.
Bild_095
1 2 3
4