Operating instructions, Taking into service – Holder C-Trac C 9700 User Manual
Page 58
Operating Instructions
145 052
57
C 9700 ... C 9.88 H
Taking into Service
Adjusting the Passenger Seat
1 Backrest
2 Weight adjustment
3 Horizontal adjustment lever
4 Backrest tilt adjustment
Adjusting the Weight
-
Sit down on the seat.
-
Press the weight adjustment knob (2) from the top
down until the weight is reached on the scale; The
weight can be adjusted in 9 stages of 50 to 130 kg.
-
Release the knob when your weight is indicated.
NOTE
Only push the knob from the top down.
-
At the bottom press the knob against the stop - the
weigh adjuster automatically resets the seat to 50 kg.
-
Release the knob.
Adjusting the Seat Horizontally
-
Pull the horizontal adjustment lever (3) up.
-
Slide the seat horizontally forward or rear to the
suitable seat position.
-
Release the horizontal adjustment lever.
Adjusting the Backrest Horizontally
-
Pull the tilt lever (4) up.
-
Adjust the inclination of the backrest with your back.
-
Release the tilt lever.
1
2
3
4