Holder C-Trac C 9700 - Manual (Page 83)

C 9700 ... C 9.88 H
Operating Instructions
82 145 052
Special Operating Instructions
Adjusting the Track Width
You can widen the track width of the tractor by adding spacers.
You have a choice of 3 different spacers.
DANGER
Observe the safety notes on safe parking and
jacking up for the wheel change in the
maintenance manual.
- Remove the wheels. Turn the wheels inside out or
install the selected spacers.
ATTENTION
The same spacers must be installed on all
four wheels.
NOTE
The arrows on the tires must show in the
forward direction of rotation.
- Tighten the wheel nuts to the specified torque.
Torque to ............................................................ 340 Nm