Holder C-Trac C 9700 - Manual (Page 134)

145 052 133
C 9700 ... C 9.88 H
Operating Instructions
Taking out of Operation
Leaving the Tractor
Stopping the Tractor
- Lower the implement completely.
- Engage the parking brake.
- Push in the hand throttle (1) fully (idle position).
- Set the forward/reverse selector lever to 0.
- Set the drive program switch to 0.
1
Bild_114
2
ATTENTION
If the engine is overheated (engine tempera-
ture gauge (3) in the red field), let the engine
run without a load until the temperature has
dropped to the green area. Do not let the en-
gine run unattended!
3
Bild_115