Operating instructions, Operating the implements – Holder C-Trac C 9700 User Manual
Page 87
C 9700 ... C 9.88 H
Operating Instructions
86
145 052
Operating the Implements
Additional Information for Implements
When installing attachments on the front and
rear 3-point lift, do not exceed the permissible
total weight , the permissible axle loads and tire
carrying capacities of the tractor. The front axle
of the tractor must always be loaded with at least
20 % of the tractor's empty weight.
Before the purchase of equipment, make sure
these conditions are met by performing the
following calculations or by weighing the tractor-
equipment combinations.
Determining the Total Weight, Axle Loads and Tire
Carrying Capacity including the Minimum Ballasting
For the calculation you need the following data:
T
L
(kg)
Empty weight of the tractor
1)
T
V
(kg)
Front axle load of the empty tractor
1)
T
H
(kg)
Rear axle load of the empty tractor
1)
G
H
(kg)
Total weight
rear implement/rear ballast
2)
G
V
(kg)
Total weight
Front implement/front ballast
2)
G
v
G
H
T
v
T
H
a
b
c
d
a (m)
Distance between centre of gravity
of front implement/front ballast and
centre of front axle
2) 3)
b (m)
Tractor wheelbase
1) 3)
c (m)
Distance between centre of rear axle
and centre of lower link ball
1) 3)
d (m)
Distance between centre
lower link ball and centre of gravity of
rear implement/rear ballast
2)
1)
See operating manual, Technical Data
2)
See price list and/or operating manual of the implement
3)
Measure