Holder C-Trac C 9700 - Manual (Page 175)

C 9700 ... C 9.88 H
Operating Instructions
174 145 052
Maintenance Every 125 Service Hours
Tightening Nuts and Bolts
- Tighten the transmission, axles and engine fasteners.
- Tighten fasteners to the specified torque according to
tables in the maintenance data.
Tightening the Wheel Nuts
- Tighten all wheel nuts at the front and rear wheels (1
and 2).
Torque ................................................................ 340 Nm
Checking the Electrical System
CAUTION
When working on the electrical system,
always disconnect the ground lead of the
battery!
- Raise the dump body (loading platform*) and secure
against accidental lowering.
- Check cables, plugs and cable ducts for damage and
security.
- Have any damaged parts replaced by an authorized
workshop.
Bild_171
1
2
* Option