Heatiator C40 - Manual (Page 27)

4/20/11 Heatilator • Constitution EPA Fireplace • 480-1091D Page 27
5. Timer Assembly Replacement
1. Remove both doors by lifting doors up and off of
hinges.
2. Remove the black knob and spring handle.
3. Remove the outside air knob and then the 4 screws
from each corner of fascia and remove the fascia.
Place on protected surface.
4. Remove the 3 center bricks from back of fireplace and
all the floor bricks .
5. Remove 2 Phillips head screws and pry open access
door in the bottom of the fireplace with a flat head
screwdriver. Figure 4.12.
6. Remove 2 screws from cover plate & pull cover plate
toward you. Figures 4.13 & 4.14. Use a flat head
screwdriver to pry the corner edge loose. Pry toward
the fireplace and then press down and out. Figure
4.15
Remove 2 screws
in cover plate
Cover Plate
Pry pointed edge
toward fireplace and
then down and out to
remove.
Cover Plate
Remove 2 screws & pry open door
Spring Handle Black Knob
Linkage Arm
1/4” bolts
Timer Assemby
Cover Plate
Mechanical
Timer
Figure 4.11 Timer Assembly
Figure 4.12
Figure 4.13
Figure 4.14
Figure 4.15
CAUTION shock Risk!
Disconnect power by turning off circuit breaker BEFORE
servicing.