HP 3000dtn - Manual (Page 76)

6-10
ENWW
The printer can automatically detect some media sizes. When the
printer detects the media size, only one size will appear in the
TRAY 2
SIZE and TRAY 3 SIZE options. If the size displayed in the LCD
control panel does not match the media you loaded in the tray, open the
tray and make sure the media sits as far in as possible. Adjust the
media width and length guides so they fit snugly but gently against the
media stack. Close the tray.
If the media size displayed in the LCD control panel still does not match
the size in the tray, the media must be loaded as a custom size.
If you are loading custom size media, you must configure the size in the
LCD control panel. Also, if you are printing on media that does not
match the media type setting for the tray, you must configure the media
type in the LCD control panel. For more information, see “
To set media
size and type in the LCD control panel .”
To set media size and type in the LCD
control panel
1 Press (select button) to enter the menus.
2 Press (down arrow button) to highlight PAPER HANDLING ,
and then press (select button).
3 Press (select button) to select TRAY X SIZE (where X = 1, 2,
or 3).
Note If the printer has the multipurpose tray installed, the multipurpose
tray functions as Tray 1.
4 Press (down arrow button) or (up arrow button) to scroll
through the media size list and highlight the desired media size.
5 Press (select button) to confirm the selection.
6 Press (down arrow button) to highlight TRAY X TYPE , and then
press (select button).
7 Press (down arrow button) or (up arrow button) to scroll
through the media type list and highlight the desired media type.
8 Press (select button) to confirm the selection.
9 Press (pause/resume button) to return the printer to the
READY state.
Note If you do not set all of the tray size and type settings,
the printer prompts you to set the remaining options when you
print a document.