Hach 900 MAX - Manual (Page 153)

Parts and Accessories
Page 151
Depth Measurement Sensors
Sensor Mounting Hardware
Option Description Part Number
Ultrasonic Sensor
40 kHz
Factory Installed Integral Ultrasonic Flow Meter Option 8851
40 KHz Range 0-10 ft, with 25-ft cable 3028
Ultrasonic Sensor with Horn, 40 KHz, with 25-ft cable 4008
Ultrasonic Sensor, CSA Approved for Class I, Division I, Groups A, B, and D Hazardous
Locations; with 50-ft cable
4010
Ultrasonic Sensor, 40 KHz, Range 0-10 ft, with 25-ft cable with bare lead ends 2653
Junction Box for ultrasonic sensor conduit installations 3658
Depth Sensor
Factory Installed Depth Only Flow Meter Option
Note: Factory Installed Integral Area x Velocity Flow Meter Option is not available with Factory
Installed Integral Depth Only Flow Meter Option 8794
General Purpose Depth Sensor, Range 0-0.576 ft with 25-ft cable 2963
Range 0-10 ft with 25-ft cable 2343
Range 0-23 ft with 50-ft cable 2333
Note: Depth sensor cables cannot be extended.
Type
Pipe Diameter
(Inches)
Part Number
Mounting Ring/Band Mounting Clip
Submerged Area/Velocity Sensor
Mounting Rings For 6-24 in. Pipes
6 1361 3263
8 1362 3263
10 1363 3263
12 1364 N/A
15 1365 N/A
18 1366 N/A
20-21 1353 N/A
24 1370 N/A
Submerged Depth/Velocity Mounting
Bands for 15-42 in. Pipes
15 9706100 N/A
18 9706200 N/A
21 9706300 N/A
24 9706400 N/A
27 9706500 N/A
30 9706600 N/A
33 9706700 N/A
36 9706800 N/A
42 9706900 N/A
45 3766 N/A
Submerged Depth Only Sensor
Mounting Ring for 6-24 in. Pipes
6 1361 1771
8 1362 1771
10 1363 1771
12 1364 1771
15 1365 1771
18 1366 1771
20-21 1353 1771
24 1370 1771