Home Automation 1503 - Manual (Page 16)

Home Automation, Inc.
14
system is armed, the Model 1503
will automatically bypass a zone if
the zone is in the alarm state when
the system is armed.
When this happens, the display
will indicate that the zone was
bypassed.
Note that there is an exit delay
before the system is armed in any
mode, so that the bypass will only
take place if the zone is in alarm
when the exit delay is over and the
system actually arms itself.
When a zone is AUTO-BYPASSED, it
will be automatically restored the
next time you arm or disarm the
system. The auto-bypass is recorded
in the event log as “ZONE NAME
BYPASSED”
To prevent any zone from being
bypassed unintentionally, you
should always look for SYSTEM OK on
the display before arming and leav-
ing the premises.
The AUTO-BYPASS feature can be
disabled if you do not want the
system to automatically bypass open
zones. If the auto-bypass feature
is disabled, the alarm will sound
if an open zone is armed.
NOTE: The AUTO-BYPASS feature is
disabled on UL Listed Installa-
tions.
then enter your master code number.
The console will beep once, and
the time, date and status display
will return. The bottom line will
now read “UPSTAIRS WINDOW BYPASSED”
to remind you that the zone is
bypassed.
RESTORING ZONES
Restoring a zone puts it back on
active duty in the system. When
restored, the BYPASSED indication
will no longer be displayed on the
status line and the zone will be
checked for alarm and trouble con-
ditions.
To restore a zone that has been
bypassed, press any of the SECURITY
keys, then the # key, the number of the
zone to restore then ENTER, (or # to
restore ALL zones), then your code
number.
For example, to turn the security
system off and restore zone 2, press
SECURITY-OFF, #, 2, ENTER, then your
code number.
The console will beep and the
display will return to the time,
date and status display. You can
also scroll through the zones by
pressing the SHOW key instead of
the zone number.
To simply restore all of the
zones, press # when the display
reads “RESTORE ZONE:”
AUTO-BYPASS
In order to prevent the alarm
from sounding unexpectedly if a
window or door is open when the