Home Automation 1503 - Manual (Page 57)

Model 1503 Owner's Manual
55
2 - SECURITY
Press 2 from the main menu to get to
the Security menu.
The Model 1503 will say: “SECU-
RITY COMMANDS ARE: 0: OFF, 1: HOME,
2: ASLEEP, 3: AWAY, STAR (*): CAN-
CEL”.
Press 0 for SECURITY OFF, 1 for HOME, 2
for ASLEEP or 3 for AWAY.
If you press 0, the Model 1503
will say: “OFF. ENTER CODE NUMBER,
STAR: BYPASS, POUND KEY: RESTORE”
At this point, you can enter
your code number to put the secu-
rity system in the whichever mode
you selected, OR you can bypass and
restore zones.
To cancel, press * twice.
To put the security system in
the mode you selected, enter your
code number on the telephone key-
pad. When correctly entered, the
Model 1503 will say “SECURITY MODE
IS (whatever you set it to.)
To bypass a zone, press the * key
instead of entering your code number.
The
Model 1503 will say “ENTER ZONE
NUMBER TO BYPASS, THEN POUND KEY.
STAR: CANCEL”.
Press the zone number that you want to
bypass, then press the # key.
The Model 1503 will repeat the
number of the zone you are bypass-
ing, then say “CODE NUMBER:”.
LO TEMPERATURE IS 65 DEGREES. HI
TEMPERATURE IS 85 DEGREES. COM-
MANDS ARE: 0: OFF, 1: ON, 2: OFF
FOR TIME, 3: ON FOR TIME, 4 LO, 5
HI, STAR (*) CANCEL.”
This message means that the en-
ergy saver is on or off, that the
air temperature at the PESM is 76
degrees Fahrenheit, that the set-
ting for the LO temperature is 65
degrees F, and that the setting for
the HI temperature is 85 degrees F.
You may turn the energy saver on or
off, on for time, off for time, or
change the low or high settings.
If a unit number has been set up
as a PESM, then (4) LO refers to
the low temperature setting and (5)
HI refers to the high temperature
setting.
To change the LO setting, press 4.
The Model 1503 will say “ENTER
LO TEMPERATURE, THEN POUND KEY.”
Enter the new low temperature, then
press the pound key.
The Model 1503 will then confirm
the new low setting.
Press star (*) to go back to the main
menu.
Remember that the LO and HI tem-
perature settings are the tempera-
tures that will be maintained by
your Model 1503 when the Program-
mable Energy Saver Module is on.
When the PESM is off, your thermo-
stat will control the temperature.
If the unit number is not set up
as a PESM, then 4 (LO) and 5 (HI)
do not do anything.