Home Automation 1503 - Manual (Page 51)

49
Model 1503 Owner's
Manual
previous program in memory.
When you reach the top of the
list, the display will show the
SHOW PROGRAMS menu.
DELETE PROGRAM
To delete a program, make sure that the
display is showing the program you wish
to delete. Then press 1. The display
will show “DELETE PROGRAM:”,” 1=
CURRENT”. Press 1 again to delete the
current program, or press CANCEL if you
do not wish to delete the program.
If you have NOT selected certain
programs for display, the menu on
the bottom line will also say “2=
ALL”. You may delete EVERY PROGRAM
IN MEMORY by pressing 2. Use with
caution! Press CANCEL if you do not
wish to delete.
If you have selected certain
programs to be displayed, as de-
scribed below, then the Model 1503
will allow you to delete only one
program at a time.
SHOW PROGRAMS FOR ALL UNIT
NUMBERS
Start at the time, date and sta-
tus display. (Press CANCEL to get
there.)
To show only the programs that involve
UNIT NUMBERs, press SHOW, PROG, UNIT-
NUMBER, SHOW.
The display will now show the
first TIMED program in program
memory that involves a UNIT NUMBER,
or NO PROGRAMS if there are no
timed programs for any unit num-
bers.
Press the SHOW key to see the next unit
number program, the SET-UP key to see
the previous unit number program. You