Home Automation 1503 - Manual (Page 59)

Model 1503 Owner's Manual
57
(EMERGENCY, FIRE or BURGLAR) ALARM
ACTIVATED
OR
(EMERGENCY, FIRE or BURGLAR) ALARM
RESET
AND one or more of the follow-
ing:
- ZONE X (ZONE TYPE) TRIPPED
- FIRE ZONE TRIPPED
- FIRE EMERGENCY BUTTON TRIPPED
- POLICE EMERGENCY BUTTON TRIPPED
- MEDICAL EMERGENCY BUTTON TRIPPED
- FREEZE ALARM TRIPPED
If the Model 1503 says ALARM
RESET instead of ALARM ACTIVATED,
then you know that the outside
siren has been automatically si-
lenced.
7 - EVENTS
To hear the event log, press 7 from the
main menu.
The Model 1503 will start at
event 1, the most recent event, and
read 3 events from the event log,
along with the time and date of
their occurrence. The Model 1503
will then say “STATUS COMMANDS ARE:
7: EVENTS, STAR: CANCEL”
To hear the next 3 events, press 7. To
stop and return to the main menu, press
*.
Note: When the Model 1503 reads
the event log over the phone, you
do not get the type of code used
(master, aux, program or key) to
arm and disarm the system.
The Model 1503 will beep once
and return you to the main menu.
6 - STATUS
To hear a complete status review, press
6 from the main menu.
You will hear a status report,
just as if you were looking at the
console display. The status report
will say: SECURITY MODE IS (OFF,
HOME, ASLEEP or AWAY)
If the alarm system has not been
activated, the Model 1503 will say:
SYSTEM OK (meaning all zones
secure, no troubles, no zones
bypassed)
OR
- ZONE X (ZONE TYPE) (IN ALARM,
TROUBLE NOW or HAD TROUBLE)
- FIRE ZONE (IN ALARM, TROUBLE NOW
or HAD TROUBLE)
- ZONE X (ZONE TYPE) BYPASSED
- BATTERY LOW (TROUBLE NOW or HAD
TROUBLE)
- PHONE LINE DEAD (TROUBLE NOW or
HAD TROUBLE)
- FUSE (TROUBLE NOW or HAD
TROUBLE)
- AC POWER OFF (TROUBLE NOW or HAD
TROUBLE)
If an outdoor temperature sensor
is installed, the Model 1503 will
say “OUTDOOR TEMPERATURE IS XX
DEGREES.” The time and date will
be spoken .
IF THE ALARM HAS BEEN ACTIVATED,
the Model 1503 will say: