Home Automation 1503 - Manual (Page 27)

25
Model 1503 Owner's
Manual
17 - 32 first Model 1102*
33 - 48 second Model 1102*
49 - 64 third Model 1102*
65 - 80 fourth Model 1102*
81 - 96 X-10 modules 1 -
16,
House Code X+1
97 - 112 X-10 modules
1 - 16,
House Code X+2
113 - 128 X-10 modules
1 - 16,
House Code X+3
* If Model 1102 Expansion Enclo-
sures are used. If not, Unit Num-
bers 17, 18 and 19 are Model 1101
PESMs or direct relay controls
connected to the Model 1503 Version
2.
Model 1503-LC systems have 19 unit
numbers:
Model 1503-LC Module
Unit Numbers Unit Numbers
1 - 16 X-10 modules 1 -
16,
House Code X
17 - 19 Model 1101 PESMs or
direct relay con-
trols
connected to the Model
1503-LC.
Note: “X” represents the House
Code setting on the Model 1503.
TURNING UNITS ON AND OFF
On the left hand side of the
console, there are four keys sur-
rounded by a border marked HOME
CONTROL. These keys are used to
turn modules on and off, or
brighten and dim lamp control mod-
ules.
To turn a unit number on or off, press
the UNIT-NUMBER key, then enter the
unit number on the keypad, then press
the home control ON or OFF key.
To see the name of the unit before
issuing the on or off command, press
the SHOW key after entering the unit
number. You can also scroll through the
names of the units under control of the
system by pressing UNIT-NUMBER, SHOW or
SET-UP (repeatedly until the desired
name is shown on the display) then ON
or OFF.
The console display top line
will read “UNIT #:” then echo the
name of the unit number that you
enter. The bottom line will read
“1-128 ON OFF TIM *LO #HI”, indi-
cating that your next step is to
enter the unit number then press
one of the following keys: ON, OFF,
the TIME key, * to DIM the light
(LO), # to BRIGHTEN the light (HI.)
Note: Model 1503-LC units menu
reads “1-19 ON OFF TIM *LO #HI”.
When you press the OFF or ON
key, the console will beep once,
the unit number will be turned off
or on and the display will return
to the time, date and status dis-
play.
DIMMING AND BRIGHTENING LAMPS