HP Data Explorer 4 Series - Manual (Page 195)

Displaying MS Method Data (Mariner Data Only)
Data Explorer ™ Software User’s Guide 4-23
4
4.6 Displaying MS Method Data
(Mariner Data Only)
Overview If you acquired a data file using an MS Method and assigned
event tags, you can display chromatogram traces in Data
Explorer filtered by event tag.
In this section This section includes:
• Example applications
• Displaying acquisition conditions and event tags
• Setting Trace Replace mode
• Filtering event tags
• Evaluating filtered traces
• Displaying additional filtered traces
Example
applications
Assume that you acquired data using two events, one
specifying a low Nozzle Potential, and one specifying a higher
Nozzle Potential to induce in-source fragmentation. You also
assigned a Tag 1 event tag to the first event and the In-Source
CID event tag to the second event.
You can filter the TIC (or any chromatogram data) to display
separate traces for the different Nozzle Potentials.
Displaying
acquisition
conditions and
event tags
To display instrument settings, MS Method segment and event
numbers, and event tags for a spectrum:
1. Display the spectrum of interest.
2. Click the Instrument Setting tab in the Output window.
Setting Trace
Replace mode
Before selecting the event tag to display, set the Trace
Replace mode (Add or Replace) in the Display Trace dialog
box. For information on Trace Replace mode, see
Section 2.4.4, Adding Traces from the Same Data File to a
Window.