HP Data Explorer 4 Series - Manual (Page 219)

Manual Calibration
Data Explorer ™ Software User’s Guide 5-15
5
NOTE: If you are calibrating Mariner data, see “Ensuring
that masses match during calibration” on page 5-24.
Applying new
constants to the
data file
To apply the calibration constants to the data:
If you are
calibrating
Click The following occurs
Mariner data
(including
MS Method
data) Apply
Calibration All spectra in the data file are calibrated and
displayed with an MC trace label. The calibration
constants are saved with the data file. Each
spectrum in the data file is calibrated when
displayed.
Voyager data Apply
Calibration The current spectrum is calibrated and
displayed with an MC trace label. The calibration
constants are saved with the spectrum.
Apply to All
NOTE: This
button is
displayed only if
you are
calibrating a
Voyager
multispectrum
data file.
All spectra in the data file are calibrated using
the currently displayed calibration, and are
displayed with an MC trace label. The calibration
constants are saved with the data file. Each
spectrum in the data file is calibrated when
displayed.
NOTE: If you select Apply to All, you overwrite
any calibrations previously applied to individual
spectra by clicking Apply Calibration.