HP Data Explorer 4 Series - Manual (Page 38)

Chapter 1 Data Explorer™ Basics
1-24 Applied Biosystems
1
1.5.2 Customizing Graphic Options
This section includes:
• Accessing graphic options
• Setting colors
• Setting line widths
• Setting data cursors
• Setting traces in line or bar mode
• Setting graphic compression
Accessing
graphic options
To access graphic options:
1. Display the trace of interest.
2. From the Display menu, select Graphic Options.
3. To use the graphic options settings for all traces, click
Use same settings for all traces in the View Setup tab.
4. Click a Graph Setup tab in the Graph and Plot Options
dialog box (Figure 1-4).
5. Set colors, line widths, data cursors, and graphic
compression as described in the following sections.
6. Click OK.