HP Data Explorer 4 Series - Manual (Page 200)

Chapter 4 Examining Chromatogram Data
4-28 Applied Biosystems
4
Figure 4-12 Baseline Offset Dialog Box
4. Right-click-drag the left baseline to offset. The selected
value is displayed in the Left Baseline field.
5. Right-click-drag the right baseline to offset. The selected
value is displayed in the Right Baseline field.
6. To limit the baseline offset to the area between the two
selected points, select Only Apply from L to R Baseline
Midpoint.
To perform the baseline offset on the entire x-axis,
deselect Only Apply from L to R Baseline Midpoint.
7. Click OK.
The offset baseline trace is displayed with a BO trace
label.
8. To return to the original trace, see “Returning to the
original trace” on page 4-4.