HP Data Explorer 4 Series - Manual (Page 227)

Manual Calibration
Data Explorer ™ Software User’s Guide 5-23
5
If you apply the calibration, the next time you open the
data file, the MC trace label is not displayed.
Voyager
data Apply Calibration The current spectrum is calibrated and
displayed with an MC trace label. The
calibration constants are saved with the
spectrum.
Apply to All
NOTE: This button is
displayed only if you
are calibrating a
Voyager
multispectrum data
file.
All spectra in the data file are calibrated
using the currently displayed calibration, and
are displayed with an MC trace label. The
calibration constants are saved with the data
file. Each spectrum in the data file is
calibrated when displayed.
If you are
calibrating
Select The following occurs