HP Data Explorer 4 Series - Manual (Page 309)

Using the Macro Recorder
Data Explorer ™ Software User’s Guide 6-39
6
De-assigning a
macro from a
button
To de-assign a macro from a button, select the macro button in
the Assign Macro dialog box, then click De-assign.
6.7.4 Running a Macro
You can run a macro using a:
• Toolbar button
• Menu command
Using a toolbar
button
To run a macro using the toolbar button:
1. Open the data file on which you want to run the macro.
2. Click the button assigned to the macro you want to run.
Hint: Place the cursor on a macro button to display the
name of the macro assigned to the button.
The macro executes.
Using the menu
command
To run a macro using the menu:
1. Open the data file on which you want to run the macro.
2. From the Tools menu, select Macros.
The Macros dialog box (Figure 6-25) is displayed.