Document Outline

• 1 Technical data
• 2 Appliance overview
  • 2.1 Keyboard overview
    • 2.1.1 Numerical input via the navigation buttons
  • 2.2 Overview of display
• 3 Basic Information (General)
  • 3.1 Proper use
  • 3.2 Improper Use
  • 3.3 Warranty
  • 3.4 Monitoring of Test Resources
• 4 Basic Safety Precautions
  • 4.1 Pay attention to the instructions in the Operation Manual
  • 4.2 Personnel training
• 5 Transport and storage
  • 5.1 Testing upon acceptance
  • 5.2 Packaging / return transport
• 6 Unpacking and placing
  • 6.1 Installation Site, Location of Use
  • 6.2 Unpacking
  • 6.3 Scope of delivery / serial accessories:
  • 6.4 Transportation lock (illustration example)
  • 6.5 Error message
  • 6.6 Placing
  • 6.7 Mains connection
  • 6.8 Storage battery operation (optional)
  • 6.9 Adjustment
    • 6.9.1 Verified weighing systems
    • 6.9.2 Non verifiable weighing systems
  • 6.10 Linearization
    • 6.10.1 Verified weighing systems:
    • 6.10.2 Non-verified weighing systems
  • 6.11 Verification
• 7 Operation
  • 7.1 Start-up
  • 7.2 Switching Off
  • 7.3 Zeroing
  • 7.4 Simple weighing
  • 7.5 Switch-over weighing unit (only not verifiable weighing systems)
  • 7.6 Weighing with tare
  • 7.7 Weighing with tolerance range
  • 7.8 Manual totalizing
  • 7.9 Automatic adding-up
  • 7.10 Parts counting
  • 7.11 Animal weighing
  • 7.12 Lock keyboard
  • 7.13 Display background illumination
  • 7.14 Automatic switch-off function „AUTO OFF“
• 8 Menu
  • 8.1 Overview non verifiable weighing systems (contacts of circuit board [K1] not short-circuited)
  • 8.2 Overview verified weighing systems (contacts of circuit board [K1] short-circuited by means of jumper)
• 9 Service, maintenance, disposal
  • 9.1 Clean
  • 9.2 Service, maintenance
  • 9.3 Disposal
  • 9.4 Error messages
• 10 Data output RS 232C
  • 10.1 Technical data
  • 10.2 Printer mode
  • 10.3 Output log
  • 10.4 Remote control instructions
• 11 Instant help
• 12 Installing display unit / weighing bridge
  • 12.1 Technical data
  • 12.2 Weighing system design
  • 12.3 How to connect the platform
  • 12.4 Configure display unit
    • 12.4.1 Verified weighing systems (contacts of circuit board [K1] short-circuited by means of jumper)
    • 12.4.2 Non verifiable weighing systems (contacts of circuit board [K1] not short-circuited )
• 13 Declaration of Conformity / Type Approval Certificate / Test Certificate
• DK0199.202-e-rev.1.pdf
  • 1. Name and type of instrument and modules
  • 2. Description of the construction and function
    • 2.1 Construction
      • 2.1.1 Indicator
      • 2.1.2 Load receptors, load cells and load receptor supports
      • 2.1.3 Interfaces and peripheral equipment
    • 2.2 Functions
      • 2.2.1 Display range
      • 2.2.2 Zero-setting
      • 2.2.3 Zero-tracking
      • 2.2.4 Tare
      • 2.2.5 Printing
      • 2.2.6 Weighing unstable samples
      • 2.2.7 Display test
      • 2.2.8 Real time clock
      • 2.2.9 Operator information messages
      • 2.2.10 Software version
      • 2.2.11 Totalisation
      • 2.2.12 Battery operation
  • 3. Technical data
    • 3.1 Indicator
      • 3.1.1 Connecting cable between the indicator and load cell / junction box for load cell(s)
        • 3.1.1.1 4-wire system
        • 3.1.1.2 6-wire system
    • 3.2 Load receptors, load cells and load receptor supports
      • 3.2.1 General acceptance of modules
      • 3.2.2 Platforms, weigh bridge platforms
      • 3.2.3 Bin, tank, hopper and non-standard systems
    • 3.3 Composition of modules
    • 3.4 Documents
  • 4. Interfaces and peripheral equipment
    • 4.1 Interfaces
      • 4.1.1 Load cell input
      • 4.1.2 Other interfaces
    • 4.2 Peripheral equipment
  • 5. Approval conditions
    • 5.1 Measurement functions other than non-automatic functions
    • 5.2 Counting operation is not approved for NAWI
    • 5.3 Totalised weight is not a legal value.
    • 5.4 Compatibility of modules
  • 6. Special conditions for verification
    • 6.1 Composition of modules
  • 7. Securing and location of seals and verification marks
    • 7.1 Securing and sealing
      • 7.1.1 Indicator
      • 7.1.2 Indicator - load cell connector - load receptor
      • 7.1.3 Peripheral interfaces
    • 7.2 Verification marks
      • 7.2.1 Indicator
      • 7.2.2 Printers used for legal transactions
  • 8. Location of CE mark of conformity and inscriptions
    • 8.1 Indicator
      • 8.1.1 CE mark
      • 8.1.2 Inscriptions
        • 8.1.2.1 Load receptors
  • 9. Pictures
  • 10. Composition of modules - illustrated
• DK0199-R76-11 04 - Kern Sohn - KFN-TM_KFB-TM_engl.pdf
  • 1. Name and type of instrument
  • 2. Description of the construction and function
    • 2.1 Construction
    • 2.2 Function
  • 3. Technical data
    • 3.1 Indicator
      • 3.1.1 Connecting cable between the indicator and the junction box for load cell(s), if any
        • 3.1.1.1 4-wire system
        • 3.1.1.2 6-wire system
  • 4. Interfaces
    • 4.1 Load cell interface
    • 4.2 Peripheral interfaces
  • 5. Conditions for use
  • 6. Location of seals and inscriptions
  • 7. Tests
  • 8. Documentation
    • 8.1 Product specification
    • 8.2 Examination report
    • 8.3 Test results
  • 9. Pictures