KERN & SOHN FA 6T-3M - Manual (Page 36)

36 KFB/KFN-TM-BA_IA-e-1220
8 Menu
The application of the display unit as a verified weighing system requires that you
short-circuit the two contacts [K1] of the circuit board, using a jumper. To that effect,
a menu for verified weighing systems is available. For menu layout see chap. 8.2.
There is no jumper for weighing systems that cannot be verified. To that effect, a
menu is available for weighing systems that cannot be verified, Menu layout
see chap. 8.1
Navigation in the menu:
Call up menu
 Switch-on balance and during the selftest press .
 Press , , subsequently, the first menu
block „PO CHK“ will be displayed.
Select menu block
 With help of , the individual menu items can be
selected one after the other.
Select setting
 Confirm selected menu item by pressing . The
current setting will be displayed.
Change settings
 To change to the available settings, press the
navigations keys as described in chap. 2.1.
Acknowledge setting /
exit the menu
 Either save by pressing or cancel by pressing .
Return to weighing
mode
 Press repeatedly to exit menu.