KERN & SOHN FA 6T-3M - Manual (Page 38)

38 KFB/KFN-TM-BA_IA-e-1220
Pr 7E1 7 bits, even parity
7o1 7 bits, odd parity
8n1* 8 bits, no parity
PTYPE tPUP* Standard printer setting
LP50 Not documented
Lab Lab x
(Lab 0*) For data output format, see chap.8.2, tab. 1
Prt Prt x
(Prt 0*)
LAnG eng* Standard settings English
chn
P3 CAL
Configuration
data
see chap. 12.4
COUNT Display internal resolution
DECI Position of the decimal dot
DUAL Setting balance type, capacity (Max) and readability (d)
off Single-range balance
R1 inc Readability
R1 cap Capacity
on Dual range balance
R1 inc Readability 1st weighing range
R1 cap Capacity 1st weighing range
R2 inc Readability 2nd weighing range
R2 cap Capacity 2nd weighing range
CAL noLin For adjustment, see chap. 6.9.2
Liner For linearization, see chap. 6.10.2
GrA Not documented
P4 OTH LOCK
on Keyboard lock enabled, see chap. 7.11
off* Keyboard lock disabled
ANM
on Animal weighing enabled, see chap. 7.10
off* Animal weighing disabled
P5 Unt
Switch-over
weighing unit,
see chap. 7.5
kg on*
off
g on
off*
lb on
off*
oz on
off*
tJ on
off
HJ on
off
P6 xcl Not documented
P7 rst
Use to reset balance settings to factory default.
P8 uwb Not documented
Factory settings are marked by *.