KERN & SOHN FA 6T-3M - Manual (Page 69)

Annex page 8 of 14
Certificate of EU type-approval no. DK 0199.202 rev.1
Issued by DELTA
7.2.2 Printers used for legal transactions
Printers covered by this type approval and other printers according to section 4.2, which have been
subject to the conformity assessment procedure, shall not bear a separate green M-sticker in order to
be used for legal transactions.
8. Location of CE mark of conformity and inscriptions
8.1 Indicator
8.1.1 CE mark
A sticker with the CE mark of conformity and year of production is located on the identification plate
which is located on the enclosure of the weight indicator.
8.1.2 Inscriptions
Manufacturer’s trademark and/or name and the type designation is located on the front panel overlay.
On the front panel of the weight indicator:
• Manufacturer’s name and/or logo
Indelibly printed on a brittle plastic sticker located on the front panel overlay:
• Max, Min, e =, accuracy class
On the inscription plate:
• Model no., serial no., type-approval certificate no., accuracy class, temperature range, electrical
data and other inscriptions.
8.1.2.1 Load receptors
On a data plate:
• Manufacturer's name, type, serial number, capacity
Left to the manufacturer’s choice as provided in section 7.1.2:
• Serial no. of the indicator