FUJITSU IMAGE SCANNER FI-486PRRE - Manual (Page 120)

97
4.5 Replacing the Brake Roller Unit
4
REPLA
C
EMENT OF CONSUMABLES
5. Pull the Brake roller toward you to remove it.
6. Attach a new Brake roller unit in the reverse order of its removal. Attach the roller
unit until it locks in.
7. Install the Guide plate in the reverse order of the removal. You should push it down
then the installation can be done smoothly.
8. Lower the ADF upper sheet guide slowly.
9. Lift the Upper transport unit a little to release the safety lock and then lower the
transport unit slowly.
10. Clear the Brake roller counter.
Please refer to the section “7.3 Setup Mode Details”, “9. Abrasion counter reset.”
Brake roller