FUJITSU IMAGE SCANNER FI-486PRRE - Manual (Page 231)

208
7.3 Setup Mode Details
26. Reset the remaining ink counter of imprinter.
If the following message comes up, prepare the new Print cartridge. If no further printing
is impossible, replace the Print cartridge and reset the ink counter. If the Print cartridge
is replaced before Print cartridge error occurs, be sure to reset the remaining ink
counter.
1) Press (Next button) or (Previous button) and let LCD display <Screen26>.
<Screen26>
Approximate remaining ink amount is shown as below:
HINT
[XXXX] is the scanned sheet counter value.
- Amount of remaining ink is high.
- The amount of remaining ink is low or empty.
HINT
In [XXXX], [Pre] or [Post] is displayed.
l e s a a
R e a d
e n w I n
i n x x x x
P e k
N o w g !
2 6 x n ! x
e R
I x x k (
= N / o s
)
e t