FUJITSU IMAGE SCANNER FI-486PRRE - Manual (Page 224)

201
7.3 Setup Mode Details
7
SETUP MODE
21. Setting SCSI bus width
1) Press (Next button) or (Previous button) and let LCD display <Screen21>.
<Screen21>
2) At <Screen21>. If Wide SCSI (68pin) interface is used, press (Right arrow button)
and select [16].
If SCSI-2 (50pin) interface is used, press (Left arrow button) and select [8].
(3) Press (Enter button) and make the setting valid.
Press (EXIT button) at the end and the LCD display goes back to [Ready]
screen.
HINT
The blinking item is the one selected.
ATTENTION
- If 16 bit bus width data transfer is prohibited,
specify [8] bit.
2 1 C s S ! S I
= i d t W 8 / 1 h 6 b i t
B u