FUJITSU IMAGE SCANNER FI-486PRRE - Manual (Page 32)

9
1.3 Basic Operations of the Operator Panel
1
BASIC SCANNER OPERA
T
IONS
■ Using the setup and the test modes.
This scanner has the setup mode to customize the setup conditions, and test mode to test
the scanner offline.
There are two types of setup mode: Online setup mode that can be entered during Ready
status and Offline setup mode that can be entered only when the scanner is offline.
Available functions differ with the two modes. For the details, refer to "Chapter 7
OPERATOR PANEL MENUS"
To enter these mode, follow the instructions below:
- Online setup mode
When LCD indicates Ready status, press (Next button). The following message
appears.
Pressing (Enter button), the scanner enters Offline setup mode.
S
M e o d e S l c
!
e t
t e u p M o d e
1