FUJITSU IMAGE SCANNER FI-486PRRE - Manual (Page 217)

194
7.3 Setup Mode Details
4) At <Screen16-2>, specify the number of pick retries. By pressing (Left arrow
button), the number of retries decreases. By pressing (Right arrow button), the
number of retries increases.
Press (Left arrow button) or (Right arrow button), and select the setting.
The number of the pick retries can be set between 1 to 7 times.
5) Press (Enter button) and make the setting valid.
Press (EXIT button) at <Screen16-1> or <Screen16-2>, then the LCD display
changes to <Screen16>.
Press (EXIT button) again and the LCD display goes back to [Ready] screen.