FUJITSU IMAGE SCANNER FI-486PRRE User Manual
Page 250
Advertising
227
7.5 Test Mode Details
7
SETUP MODE
5) At <Screen50-3>, press
(Left arrow button) or
(Right arrow button) and:
Select [On] to do imprinter test while scanning.
Then, select the imprinter to use.
If the printer to use is fi-486PRFR, select [Pre].
If fi-486PRRE, select [Post].
If imprinter test is not required, select [Off] .
6) Press
(Start button). Scanning operation starts with or without imprinter test.
HINT
If you want to quit, press
(Stop button).
The LCD goes back to <Screen51>.
Advertising
This manual is related to the following products: