FUJITSU IMAGE SCANNER FI-486PRRE - Manual (Page 219)

196
7.3 Setup Mode Details
4) In <Screen17-2>, specify the number of retries. By pressing (Left arrow button),
the number of retry decreases. By pressing (Right arrow button), the number of
retries increases. The number of the feed retries can be set between 1 to 7 times.
Press (Left arrow button) or (Right arrow button), and select the setting.
5) Press (Enter button) and the setting becomes valid.
Press (EXIT button) at <Screen17-1> or <Screen17-2>, the LCD display
changes to <Screen17>.
Press (EXIT button) at <Screen17> and the LCD display goes back to [Ready]
screen.