FUJITSU IMAGE SCANNER FI-486PRRE User Manual
Page 209
186
7.3 Setup Mode Details
4) In <Screen9-1> to <Screen9-5>, to reset the corresponding counter, press
(Left
arrow button) and select [Reset].
Press
(Enter button) to confirm the selection, then <Screen9-6> is displayed.
If you do not want to reset the counter, select [No] and press
(Enter button).
<Screen9-6>
5) If reset is really OK, select [YES] and press
(Enter button).
To cancel Reset, select [No] and press
(Enter button).
Press
(EXIT button) at <Screen9-1>, <Screen9-2>, <Screen9-3>, <Screen9-4>
or <Screen9-5>, the LCD display changes to <Screen9>.
Press
(EXIT button) at <Screen9> and the LCD display goes back to [Ready]
screen.
HINT
[XXXXXX] is the counter value of the selected
consumable.
- Pick roller counter
- Brake roller counter
- Pad counter
- Front-side lamp counter (lamp-on time)
- Back-side lamp counter (lamp-on time)
0
9
N
R
!
o
e
-
Y
6
x
e
t
e
x
x
s
x
N
/
o
s
w