Setup mode – FUJITSU IMAGE SCANNER FI-486PRRE User Manual
Page 222
Advertising
199
7.3 Setup Mode Details
7
SETUP MODE
19. Setting of SCSI ID
1) Press
(Next button) or
(Previous button) and let LCD display <Screen19>.
<Screen19>
2) At <Screen19>, press
(Left arrow button) or press
(Right arrow button) to
select SCSI ID number.
3) Press
(Enter button) and make the setting valid.
Press
(EXIT button) at the end and the LCD display goes back to [Ready]
screen.
HINT
The blinking item is the one selected.
HINT
Changed SCSI ID becomes valid after the next
power on.
1
9
C
I
S
!
D
S
I
=
0
1
/
2
/
3
/
4
/
/
5
/
6
/
7
Advertising
This manual is related to the following products: