FUJITSU IMAGE SCANNER FI-486PRRE - Manual (Page 141)

118
5.2 Troubleshooting
NO
YES
YES
NO
NO
Are the documents loaded properly
on the hopper?
Is the upper transport unit closed
correctly?
Load the documents properly.
Close the upper transport unit
correctly.
Is the interface cable connected
properly? Connect the interface cable
properly.
Symtom3
Scanning does not start.
YES
Is the SCSI ID set correctly?
YES
Continued on next page
Set the SCSI ID correctly
by SCSI ID switch on rear
of the scanner.
NO