5 test mode details – FUJITSU IMAGE SCANNER FI-486PRRE User Manual
Page 245
Advertising
222
7.5 Test Mode Details
If fi-486PRFR and/or fi-486PRREis installed, <Screen50-3> is displayed fo you to
setup imprinter test conditions.
If an imprinter(s) is not installed, the scanner starts scanning operations.
<Screen50-3>
5) At <Screen50-3>, press
(Left arrow button) or
(Right arrow button) and:
Select [On] to do imprinter test while scanning.
Then select the imprinter to use.
If the printer to use is fi-486PRFR, select [Pre].
If fi-486PRRE, select [Post].
If imprinter test is not required, select [Off].
6) Press
(Start button). Scanning operation starts with or without imprinter test .
HINT
If you want to quit, press
(Stop button).
LCD display goes back to <Screen50>.
e
O
=
f
/
f
O
:
P
n
r
n
r
P
i
t
o
/
s
t
P
Advertising
This manual is related to the following products: