FUJITSU IMAGE SCANNER FI-486PRRE - Manual (Page 194)

171
7.3 Setup Mode Details
7
SETUP MODE
2. Setting Pre-pick
1) Press (Next button) or (Previous button) and let the scanner show <Screen2>.
<Screen2>
2) At <Screen2>, to enable Pre-pick, press (Left arrow button) and select [On].
To disable Pre-pick, press (Right arrow button) and select [Off].
3) Press (Enter button) and make the setting valid.
Press (EXIT button) at the end and the LCD display goes back to [Ready] screen.
0 2 - c e ! k p i
=
P r
f f O / n O