6 replacing the front-side lamp, Replacing the front-side lamp – FUJITSU IMAGE SCANNER FI-486PRRE User Manual
Page 121
Advertising
98
4.6 Replacing the Front-side Lamp
4.6 Replacing the Front-side Lamp
1. Lift the lever located at the right to open the Upper transport unit.
CAUTION
Never replace the Lamp without
turning off the power.
Wait 5 minutes after turning off the
power before touching the Lamp.
CAUTION
Make sure that the Upper transport unit is
locked before you put your hands inside of
the scanner.
Advertising
This manual is related to the following products: