FUJITSU IMAGE SCANNER FI-486PRRE - Manual (Page 242)

219
7.5 Test Mode Details
7
SETUP MODE
7.5 Test Mode Details
1. Single feed
Without connecting PC, the scanner's whole mechanism operation can be checked.
Only one sheet of document is fed with this test.
Scan parameters can be changed and used for scanning.
Imprinter test print can be performed at the same time.
1) Place the documents to scan on the hopper.
2) Press (Next button) or (Previous button) and let the LCD show <Screen50>.
<Screen50>
3) At <Screen50>, press (Enter button) or (Start button). Then <Screen50-1>
is displayed.
<Screen50-1>
4) At <Screen 50-1>, press (Right arrow button) and select [Setup].
Press (Enter button) or (Start button). Then <Screen50-2> is displayed.
<Screen50-2>
T 0 1 S i n g l e f e e d
S A 4 P W 2 B 0 0
T T S A R e p S t u
e t S A 4 P W 2 B 0 0