FujiFilm 4500N - Manual (Page 11)

2
1.1 Operating Environment
General Precautions
● Follow the instructions provided in this manual only.
WARNING: ● Use the indicated voltage only. Do not use an extension cord with an insufficient
power rating or serially connected extension cords as fire or electrical shock
may result.
● A 2-pin outlet cannot be grounded. In case of leakage, electrical shock may
result.
● Do not scratch, damage, or physically alter the power cord. Do not place a
heavy object on the power cable. Do not forcibly pull or bend the power cable.
Such acts may damage the power cable resulting in fire or electrical shock.
● Do not touch the power plug with wet hands. An electrical shock may result.
● Do not modify the product. Fire or electrical shock may result. The product
contains semiconductor lasers. If modified, the user may be exposed to laser
light.
● Do not remove covers or parts tightened with screws. This may cause injury
or electrical shock to personnel.
● Do not place metal objects or receptacles containing water, such as a flower
vase, potted flower, or water glass on the machine. If water should fall inside
the machine, fire or electrical shock may result.
● If you notice smoke rising from the machine, a high frame temperature, strange
odors or abnormal sounds, immediately turn the power switch OFF ( ), unplug
the power cable and contact your local dealer. If the machine is used in such
a condition, fire or electrical shock may result.
CAUTION: ● Do not place the machine on an unstable surface, such as an unsteady table
top or a tilted place. The machine may drop or fall, causing injury to personnel.
● Once the machine is installed, lock the casters. Otherwise, the machine may
move or fall down, causing injury to personnel.
● Before moving the machine, always unplug the power cord from the outlet.
Otherwise, the cable may be damaged, causing fire or electrical shock.
● When you unplug the power cord, always hold the plug. Pulling the power
cord may expose wires or cause wires to break, causing fire or electrical
shock.
● When cleaning the machine cabinet, do not use a spray cleaner containing
flammable materials. A fire may be caused.
● Do not press the open/close switch of a door on the machine when it is open.
The switch is for protection. The machine may assume the door is closed and
start operating, causing injury to personnel.