2 setup using utility, 1 setting it up on windows – FujiFilm 4500N User Manual
Page 81
72
4.15.2
Setup Using Utility
A connected host (computer) could be a Windows machine or Macintosh machine.
After the setting is made, be sure to turn the power of PICTROGRAPHY 4500N OFF, then ON.
4.15.2.1
Setting It up on Windows
This section describes how to set up this product when using in the Windows95/98, WindowsNT4.0,
Windows2000 or WindowsXP environment. We recommend that you use Quick Setup on the CD-
ROM that comes with the product when setting it up for the first time. Quick Setup is in a simple
setup wizard format.
The following are example setup procedures in the Windows XP environment.
1
.
If the CD-ROM of the user software is inserted into the
CD-ROM drive, the user software will boot up.
★
Select the language of your preference by clicking. (This
book describes the procedures when US English is
selected.)
2
.
Click the software to use, or install.
★
When making settings of PICTROGRAPHY 4500N, click
on "STANDARD".
("QUICK" will not be used.)
3
.
Choose between setting it up without installing the setup
application (AdminManager) and setting it up following its
installation.
(This book describes how to set it up without installing the
application.)
4
.
The Software License Agreement appears.
★
Click the "Yes" button to proceed to the next dialog box.
4.15 Network setting