7 fine adjustment of print image position – FujiFilm 4500N User Manual
Page 62
53
4
HO
W
T
O
USE
THE OPERA
TION P
ANEL
To adjust the position of a print image, follow the procedure below.
NOTE:
●
The X and Y directions with respect to the print output direction are indicated below.
X: X decreases by pressing the – key.
X increases by pressing the + key.
Y:
Y decreases by pressing the – key.
Y increases by pressing the + key.
4.7
Fine Adjustment of Print Image Position
1
.
Press the ONLINE key on the operation panel to switch
the machine to OFFLINE condition.
2
.
When the machine is in OFFLINE mode, press the NEXT
key twice.
★
The message changes to "Configuration".
3
.
Press the SEL key.
★
The message changes to "Size".
4
.
Press the NEXT key four times.
★
The message changes to "Margin Control".
■
To change the margin width in the X direction
1
.
Press the SEL key.
★
The message changes to "X mm".
X
Y
Print Output Direction
Image Area
Configuration
ESC
PREV
SEL
NEXT
Size
ESC
PREV
SEL
NEXT
[ ]
DP +
[ ]
–
Margin Control
ESC
PREV
SEL
NEXT
X
ESC
PREV
SEL
NEXT
[ ]
0
mm
+
[ ]
–