1 when a problem occurs – FujiFilm 4500N User Manual

Page 119

Advertising
background image

110

Symptom

Possible Cause

Remedial Action

The power does not turn ON. (Nothing

Power switch is not turned

Turn the power switch to ON (

).

is displayed on the operation panel.)

ON.

Power cable is not properly

Pull out and securely reconnect the

connected.

power cable.

Power is not supplied to the

Check if power is being supplied to the

outlet.

power outlet.

The jam error code "J65-1" and "

Insufficient water in the water

Insert the water supply hose into the

J70-1" (donor and receiver do not

coating section

water supply port until it clicks into

detach) frequently appear in the

position.

display.

The print is blank or partially blank.

Make sure that the O-ring is mounted
both on the water filter and the water
filter holder (on the main unit).

Replace the water filter.

The water bottle is set in position, but a

The water bottle has been

Turn ON (

) the power switch and

"Warning Check Water Bottle" error

inserted while the power is set remore the water bottle. After 10

appears in the display.

to OFF (

).

seconds, re-install the water bottle.

After the power is set to ON (

), a

One week or more passed

Replace the water. (See page 35.)

"Warning WATER CHANGE" error

since the last water

appears in the display.

replacement.

The donor or receiver magazine is set in

Magazine is not installed

Install the magazine properly according

position but a "Warning Check Donor-

properly.The magazine is not

to the magazine replacement procedure.

Magazine" or "Warning Check Paper-

pushed all the way in.

(See pages 27 and 32.)

Magazine error appears in the display.

After the power is set to ON (

), a

Donor or receiver is used up.

Replace the magazine according to

"Warning Donor Empty" or "Warning

the magazine replacement procedure.

Paper Empty" error appears in the display.

(See pages 27 and 32.)

The host computer is used to start a

The interface cable is not

Remove the interface cable, and then

print job, but the printer does not

security connected.

reconnect it securely.

respond.

7.1

When a Problem Occurs

Advertising