FujiFilm 4500N - Manual (Page 73)

64
To adjust the color, follow the procedures below.
■ Color Control Adjustment Items
Adjustment Item
Setup
Range
Effect on Print Image
Brightness /
Contrast
Color balance
Color matching
Brightness
Contrast
R. Balance
G. Balance
B. Balance
Matching
(SCSI 2)
–9~+9
–9~+9
–9~+9
–9~+9
–9~+9
ON 1
ON 2
ON 3
ON 4
OFF
When increased on :
+ side : Brighter image
– side
: Darker image
+ side : Higher contrast
– side
: Lower contrast
+ side : Red becomes stronger.
– side
: Cyan becomes stronger.
+ side : Green becomes stronger.
– side
: Magenta becomes stronger.
+ side : Blue becomes stronger.
– side
: Yellow becomes stronger.
ON1 : The color matching function suitable for
overall CG images is activated.
ON2 : The color matching function suitable for
photo images is activated.
ON3 : The color matching function suitable for
sRGB color space is activated.
ON4 : The color matching function similar to the
"Matching: OFF" on the Pictrography 4000 is activated.
OFF : The basic characteristics of the printer are used.
4.14 Color Control Adjustment Procedures
■ Brightness control
1 . Press the ONLINE key on the operation panel to switch the
machine to OFFLINE mode.
2 . When the machine is in OFFLINE mode, press the NEXT
key.
★ The message changes to "Color Control".
3 . Press the SEL key.
★ The message changes to "Brightness".
Color Control
ESC
PREV
SEL
NEXT ON LINE
Brightness
ESC
PREV
SEL
NEXT
[ ]
0 +
[ ]
–