FujiFilm 4500N - Manual (Page 79)

70
10. Press the NEXT key.
★ Screen for setting subnet mask opens. Subnet mask
currently set is displayed at this time. Move four figures
to be changed using the SEL key and change numeric
figures using the - or + key. (Numeric figures from 0 ~
255 can be used).
NOTE: When setting of DHCP/BOOTP or RARP is "Enable", the set
numeric figures can only be displayed, not changed.
11. Press the NEXT key.
★ Screen for setting default gateway opens. Default
gateway currently set is displayed at this time. Move
four figures to be changed using the SEL key and
change numeric figures using the - or + key. (Numeric
figures from 0 ~ 255 can be used).
NOTE: When setting of DHCP/BOOTP or RARP is "Enable", the set
numeric figures can only be displayed, not changed.
12. Press the ESC key.
★ Screen for setting TCP/IP opens.
13. Press the NEXT key.
★ Screen for setting AppleTalk opens.
When AppleTalk is to be enabled, select "Enable" using
the - or + key and when it is to be disabled, select
"Disable".
14. Press the NEXT key.
★ MAC address is displayed.
Subnet Mask
[ ]
255.255.255.0 +
[ ]
–
ESC
PREV
SEL
NEXT
Default Gateway
[ ]
192.168.001.001 +
[ ]
–
ESC
PREV
SEL
NEXT
AppleTalk
[ ]
Enable +
[ ]
–
AppleTalk
[ ]
Disable +
[ ]
–
ESC
PREV
SEL
NEXT
Mac Address
00:C0:2D:20:00:07
ESC
PREV
SEL
NEXT
4.15 Network setting