FujiFilm 4500N - Manual (Page 15)

6
1.4 Electrical Hookup
● Connect the power plug directly into a 120V
±
10V, 60 Hz grounded outlet (3-pin) which has a
power rating of 15 A or more.
WARNING: ● DO NOT USE a two-pin power outlet which is not grounded, as an electrical
shock may result when short circuiting occurs.
● Use the indicated power supply voltage only. Never use an extension cord
with an inadequate rating. If such a cord is used, abnormal heat generation,
smoke or other abnormal phenomena may occur.
● Perform the following checks on a periodic basis.
● Make sure the power plug is properly inserted into a dedicated power outlet.
●
Check the power plug and cable for abnormal heat generation.
● Make sure the power cable is not cracked or damaged.