FujiFilm 4500N User Manual
Page 82
73
4
HO
W
T
O
USE
THE OPERA
TION P
ANEL
5
.
The setup application (AdminManager) starts up, and it
shows the Ethernet address (MAC address) and the current
IP address of PICTROGRAPHY 4500N on the network.
(In case a subnet is being established, this display may not
be made. Make broadcast address setting by referring to
step 5 and step 10 of "3.6.3.1 Make settings in Windows
environment" of "Installation guide".)
6
.
Click PICTROGRAPHY 4500N to select it. (It will be
highlighted.) If it shows more than one PICTROGRAPHY
4500N, select the one you wish to set up.
★
Select [PICTROGRAPHY Settings] from the [Setup]
menu.
7
.
The setup dialog box appears.
Click the [General] tab to set up or change the root password.
★
Click the [TCP/IP] tab to configure it to use or not use
the TCP/IP protocol, and to set up each TCP/IP setting.
★
Click the [Apple Talk] tab to configure it to use or not use
the Apple Talk protocol, and to set up Printer and Zone
when you choose to use it.
8
.
Select [IP address Setup] from the [Setup] menu to change
the IP address.
4.15 Network setting